Chengdu Senlu Electric Co.,Ltd
We, Senlu lighting, is a top LED manufacturer in China, targeting at high-end market, especially high power products. We spend 12 years on the research of effective heat sink with the purpose of solving the main problem of LED – heat dissipation. In 2015, the 9 th generation heat sink (sunflower...Chat Now
1. Photos of 100W LED floodlight
|2. Structure of 100W LED floodlight|
|3. Parameters of 100W LED floodlight|
4. 100W LED floodlight IES / LUX
|5. Installation: Handle or Hoist Pole or Hoist Hook|
Advantage & Benefit
1. Light Source: Original Citizen COB/Bridgelux Array2. High Effect Patented Heat Sink
3. Stable Quality And Long lifespan Driver
(1) Top Brand driver electronic components.
(2) Efficiency >88% , Power Factor:0.99 (Built-in active PFC), THD <10%
(3) IP65/66, Waterproof/Dustproof/Antiseptics
(4) Lifespan: 50000 hours at 25 deg C
(5) Wide voltage input 85~265V AC
(6) Smart dimmer(Optional): Dali,PWM,1-10V dc,Time dimming.
(7) Multiple Protections:
Short Circuit Protection, Open Circuit Protection,Overload Protection, Filter Protection, Over voltage Protection, Lighting Strike protection
(8) Patented design: Senlu designed plug-in and out connecting waterproof piece with rubber material at input and output end of driver, if driver failure happen, easy for replacement with a new driver.
4. Optical Glass Lens with High Light Transmission
(2) Multiple angle 45,65,85,120 and 60*120degree optional, anti-glare glass lens and PC lens optional.(1) Senlu's LED floodlight with Optical glass lens which light trnasmission reach 95%,index of refraction 1.474, working temperature -50-500 ℃, without aging and dustproof, low lumen loss.
|Strict QC System|
Extension: the difference between floodlights and floodlights
Scoop light, a point source that can be uniformly illuminated in all directions, uniformly illuminates an object from a specific point in all directions. Its illumination range can be adjusted arbitrarily. Floodlights are one of the most widely used sources in renderings, and standard floodlights are used to illuminate the entire scene. Multiple floodlights can be applied to the scene. To produce better results.
Floodlights are almost no specific source of surface illumination.
The floodlights in a broad sense enable lamps that specify illumination on the illuminated surface to be higher than the surrounding environment. Typically, it can be aimed in any direction and has structures that are unaffected by climatic conditions. Mainly used for large-area job mines, building outlines, stadiums, overpasses, monuments, parks and flower beds. Therefore, almost all large-area lighting fixtures used outdoors can be regarded as floodlights. The angle of the exit beam of the floodlight is narrow and wide, ranging from 0° to 180°, and the beam is particularly narrow, which is called a searchlight.
However, in practice, the spotlights in the narrow sense usually refer to spotlights, spotlights, etc., where the beams are concentrated, and are generally used for architectural decorative lighting, as well as for commercial space lighting, with decorative components being heavier.
The illumination target of the floodlight usually has a specific target.
Copyright © Chengdu Senlu Electric Co.,Ltd All Rights Reserved.